Large Fiber Replacement Seat - Tufted Shaped Pattern
Untrimmed Size: 15-3/4" Square
Overall Pattern Size: Front - 13-1/4" wide; Back - 10-1/4" wide, Depth - 12-3/8"
The suggested minimum trim size for this seat is 1 inch greater that the pattern size. Note that the embossed pattern is not always centered on the board. In some cases, the pattern is as much as 3/16" off center.
These chair seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recommend using a piece of trimmed scrap from the seatboard to test the results.
We suggest using the AD-3509 nails for the installation of chair seats as they have small heads with a low dome. We also carry decorative nails if you are looking for something more decorative. To determine the number of nails necessary, plan on using a least one nail every 1" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.
Item No: K-9054Unit Price: $37.48
This item has been discontinued but we are looking for another vendor. Please check back later. Sorry for the inconvenience.