Fiber Replacement Seat - Four Hearts Pattern
Untrimmed Size: 15" Square
Overall Pattern Size: 12-1/2"diameter
The suggested minimum trim size for this seat is 1 inch greater that the pattern size. Note that the embossed patten is not always centered on the board. In some cases, the pattern is as much as 3/16" off center.
These Chair Seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recomment using a piece of trimmed scrap from the seatboard to test the results.
We suggest using the AD-3509 Nails for the installation of chair seats as thay have small heads with a low dome. We also carry Decorative Nails if you are looking for something more decorative. To determine the number of nails necessary, plan on using a least one nail every 1" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.
Item No: K-9002
Unit Price: $11.18This item has been discontinued but we are looking for another vendor. Please check back later. Sorry for the inconvenience.