Fiber Seatboard - Bow

Fiber Seatboard - Bow

Fiber Replacement Seat - Ribbon Bow Pattern

Untrimmed Size: 14-1/2" Square

Overall Pattern Size: Front - 11-3/8" wide; Back - 9-1/4" wide, Depth - 10-1/2"

The suggested minimum trim size for this seat is 1 inch greater that the pattern size. Note that the embossed pattern is not always centered on the board. In some cases, the pattern is as much as 3/16" off center.

These chair seats are made of a specially formulated fiberboard that will not separate. They can be trimmed with a pair of shears, tin snips or a band saw. They can be painted, stained, sealed, or used as is. As these boards take stain differently than wood, we recommend using a piece of trimmed scrap from the seatboard to test the results.

We suggest using the AD-3509 nails for the installation of chair seats as they have small heads with a low dome. We also carry Decorative Nails if you are looking for something more decorative. To determine the number of nails necessary, plan on using a least one nail every 1" to 1 1/2" apart. For example, a chair seat 13" in diameter using a 1 1/2" spacing would require 28 nails.

Item No: K-9022

Unit Price: $27.34

This item has been discontinued but we are looking for another vendor. Please check back later. Sorry for the inconvenience.