Chair Parts

There are two methods of wooden chair construction, "joined" chairs, and "stick" chairs. Joined chairs are attached with mortise-and-tenon joints creating robust joinery, but production is time-consuming and expensive, thus consequently reserved for formal seating. The "stick built" chair was more economical, being characterized by round tenons fitted into round sockets. Round tenons were easily turned on a lathe, while sockets were simply bored with a drill.

« Back to Wood Accessories List


View Bent Oak Rocker Runners - 5/8" Bent Oak Rocker Runners - 5/8" Steam Bent Oak Rocker Runners Overall - 1-5/16"high x 34-1/4"long (Length measurement straight across from tip to tip.) Stronger than Cut Runners, these Oak Runners are STEAM BENT. Sanded, Unfinishe ... View Product Details »

SKU: W3-5220
Price: $24.95
View High Chair Tray - GROOVED Oak High Chair Tray - GROOVED Oak OAK HIGH CHAIR TRAY - GROOVED Overall - 20 1/2" wide x 11 3/4" deep x 1 3 32" thick ... View Product Details »

SKU: W3-5226
Price: $33.95
View High Chair Tray - ROUND Oak High Chair Tray - ROUND Oak OAK HIGH CHAIR TRAY 16" wide X 8 1/2" deep at center 7" deep on ends. ... View Product Details »

SKU: W3-5225
Price: $33.95
View High Chair Tray Arms - Bent OAK High Chair Tray Arms - Bent OAK BENT OAK HIGH CHAIR TRAY ARMS. 23" long following curve Sold by the pair only Spacers included. ... View Product Details »

SKU: W3-5212
Price: $14.95
View High Chair Tray Sliding Hardware High Chair Tray Sliding Hardware Sliding HIGH CHAIR TRAY HARDWARE Arm Piece - 6" long x 5/8"wide x 7/8" deep Tray Piece 3 5/16"long x 1" wide x 15/16" deep Best for use with our View Product Details »

SKU: S-5213
Price: $22.50
View Hiphugger Clips Hiphugger Clips Set of 4 HIPHUGGER CLIPS Statuary Bronz Outside dimensions - 1" long x 11/16" wide x 1/2" high Screw hole - 1/4" diameter Reproduced from the original. Made to fit a 7/8" dia. Hiphugger. Sold in sets ... View Product Details »

SKU: AS-2700
Price: $2.95
View Hiphuggers - Unfinished Oak Hiphuggers - Unfinished Oak OAK HIP HUGGERS 6 1/2"h x 5 1/4" deep x 7/8" dia. (dimensions when installed) 11"long from tip to tip when measured along the outer curvature. **Please note: ALL measurements are approximate. One end ... View Product Details »

SKU: W3-2701
Price: $11.95
View MAPLE QUEEN ANNE WINGED LEG MAPLE QUEEN ANNE WINGED LEG MAPLE QUEEN ANNE WINGED LEG 6 INCHES ... View Product Details »

SKU: W5-2646
Price: $21.95
View MAPLE SOFA LEG MAPLE SOFA LEG MAPLE SOFA LEG 6 1/4" HI X 4 1/2 IN WIDE ... View Product Details »

SKU: W5-2622
Price: $28.95
View Platform Rocker Springs - JUVENILE Platform Rocker Springs - JUVENILE Single Platform Rocker Springs - JUVENILE Sold by the Pair Base - 3 1/4" X 2 1/2" ... View Product Details »

SKU: S-5243
Price: $6.75