Chair Parts
Splint is obtained from ash, hickory and rattan. Ash splints are cut to a uniform width while hickory splints are generally slightly varied. The outer bark of the rattan palm is stripped for use as cane, and the core is split into round and flat strips of various widths and thickness called reed. Splint and flat reed are suitable for indoor furniture while round reed and binding cane are appropriate for outdoors.
« Back to Caning & Weaving List
Bent Oak Rocker Runners - 5/8"
Steam Bent Oak Rocker Runners
Overall - 1-5/16"high x 34-1/4"long (Length measurement straight across from tip to tip.)
Stronger than Cut Runners, these Oak Runners are STEAM BENT. Sanded, Unfinishe ... View Product Details » SKU: W3-5220
Price: $24.95
High Chair Safety Strap - NATURAL
HIGH CHAIR SAFETY STRAP 13"long X 5/8"w Natural Leather Includes Screw Snap for easy installation (instructions included). First appeared on High Chairs & Potty Chairs in the mid-1920's. ... View Product Details » SKU: L-5221
Price: $5.25
High Chair Tray - GROOVED Oak
OAK HIGH CHAIR TRAY - GROOVED Overall - 20 1/2" wide x 11 3/4" deep x 1 3 32" thick
... View Product Details » SKU: W3-5226
Price: $33.95
High Chair Tray - ROUND Oak
OAK HIGH CHAIR TRAY 16" wide X 8 1/2" deep at center 7" deep on ends. ... View Product Details » SKU: W3-5225
Price: $33.95
High Chair Tray Arms - Bent OAK
BENT OAK HIGH CHAIR TRAY ARMS. 23" long following curve Sold by the pair only Spacers included. ... View Product Details » SKU: W3-5212
Price: $14.95
High Chair Tray Sliding Hardware
Sliding HIGH CHAIR TRAY HARDWARE Arm Piece - 6" long x 5/8"wide x 7/8" deep Tray Piece 3 5/16"long x 1" wide x 15/16" deep Best for use with our View Product Details » SKU: S-5213
Price: $22.50
Hiphugger Clips
Set of 4 HIPHUGGER CLIPS Statuary Bronz Outside dimensions - 1" long x 11/16" wide x 1/2" high Screw hole - 1/4" diameter Reproduced from the original. Made to fit a 7/8" dia. Hiphugger. Sold in sets ... View Product Details » SKU: AS-2700
Price: $2.95
Hiphuggers - Unfinished Oak
OAK HIP HUGGERS 6 1/2"h x 5 1/4" deep x 7/8" dia. (dimensions when installed) 11"long from tip to tip when measured along the outer curvature. **Please note: ALL measurements are approximate. One end ... View Product Details » SKU: W3-2701
Price: $11.95
Morris Chair Brackets - Pair
Brass MORRIS CHAIR BRAKETS 7 3/4" long x 15/16" wide Hooks will accommodate 3/8" to 1/2" diameter rods. Common angle of brackets adapt to the curve of most Morris chairs. Sold by the Pair ... View Product Details » SKU: B-5277
Price: $43.95
Morris Chair Rod - Brass
MORRIS CHAIR ROD Overall 29 1/4" long x 3/8" dia. Beehive Finials - 3/4" long x 7/8" dia. Finials are attached with set screws which can be removed, allowing the rod to be cut to length if necessary. ... View Product Details » SKU: B-5287
Price: $23.50
